³Ô¹ÏȺ

Skip Navigation
Universal 2 Series - Rectangular Flange - Positive Displacement Pumps

Specifically designed to pump "unpumpable" products, such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps.

MODEL

DISPLACEMENT
PER REVOLUTION

NOMINAL
CAPACITY TO

MAXIMUM
PRESSURE
014-U2 0.0142 GAL. (0.054 Liter) 5.68 GPM (1.3 m³/hr.) 200 PSI (13.8 bar)
034-U2 0.060 GAL. (0.227 Liter) 24 GPM (5.5 m³/hr.) 250 PSI (17.2 bar)
064-U2 0.153 GAL. (0.579 Liter) 61 GPM (13.9 m³/hr.) 300 PSI (20.7 bar)
134-U2 0.253 GAL. (.958 Liter) 101 GPM (22.9 m³/hr.) 200 PSI (13.8 bar)
184-U2
0.380 GAL. (1.438 Liter)
152 GPM (34.5 m³/hr.)
450 PSI (31.0 bar)
214-U2 0.502 GAL. (1.90 Liter) 200 GPM (45.4 m³/hr.) 500 PSI (34.5 bar)
224-U2 0.521 GAL. (1.972 Liter) 208 GPM (47.2 m³/hr.) 300 PSI (20.7 bar)
324-U2 0.752 GAL. (2.847 Liter) 300 GPM (68.1 m³/hr.) 300 PSI (20.7 bar)

MODEL 014

0-600 RPM speed range. 1½" (38.1 mm) discharge port; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).


Ìý
A
AA
AOL
B
CP
CP1
CP4
DL
E
F
H
I
J
L
U
X
2X
IN
6.75
1.95
12.50
4.13
11.71
13.92
14.92
8.88
.38
2.31
.41
7.66
2.12
9.61
.875
3.63
7.11
MM
171
50
318
105
297
354
379
226
10
59
10
195
54
244
22.23
92
181

Ìý
C
CA
CB
CC
FA
FB
HA
PA
PB
PC
PD
IN
.50
1.62
6.50
.50
2.63
7.50
.41
1.44
4.94
.59
1.28
MM
13
41
165
13
67
191
10
37
125
15
33

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 014-U2 to 034-U2, 1"-11-½ NPT on Models 064-U2 and 134-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.

Approximate shipping weight 66 lb. (30 kg.) pump only.

NOTES:ÌýDimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed. Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

Pump Curve 95-07153 - Rectangular Flange Model 014-U2 PDF || PDF

Ports Standard:Ìý Sanitary Clamp Type Is available in a variety of styles including S-Line, I-Line and Q-Line Options:

  • Bevel Seat Available
  • Optional European Types; DIN, SMS, RJT
  • Male NPT and 150 lb. flange optional on Models 014 through 324 size
  • 150 lb. flange standard on Model 324
  • Contact factory for available rectangular flange inlets

Rotors Standard:ÌýTwin Wing -ÌýStandard; suitable for most application

  • Single Wing - For reduced breakage on fluids with discrete particulates, such as diced tomato products

Rotor clearance Standard:Ìýup to 180°F (82°C) Options:

  • Hot clearance rotors option for applications up to 300°F (149°C)
  • Other special clearances available

O-Rings Standard:ÌýÌýBuna-N Options:

  • PTFE/FFKM
  • Fluoroelastomer (FKM)
  • Fluoroelastomer (FKM) - Class 6
  • EPDM
  • EPDM - SF
  • EPDM - Class 6
  • Silicone
  • Perfluoroelastomer (FFKM)
  • FEP Encapsulates
  • Buna-N - Metal Detectable
  • FKM - Metal Detectable
  • EPDM - Metal Detectable

Cover & Gearcase Standard: cast iron powder coated gearcase, 17-4 stainless steel shafts, stainless steel bearing retainers Options:

  • Stainless steel gearcase
  • 316L stainless steel shafts
  • Steel-It paint
  • Lower shaft position
  • Bearing Isolators
  • Pedestal shims for side mounted pumps. Left hand shaft position standard.
  • Right hand shaft position on side mounted gearcase

°Õ°ù³Ü-¹ó¾±³Ù® Close coupled °Õ°ù³Ü-¹ó¾±³Ù® pump mounted on stainless steel baseÌýwith stainless steel adaptors standard. Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.

³Ô¹ÏȺ - WCB - Positive Displacement Pumps - How the rotors move inside the pump

Maintenance Introduction for Universal 2 Series Positive Displacement Pumps - WCB

Universal 2 Positive Displacement Pump Cover, Body, Rotors, Seals Maintenance - WCB

Gear Case Assembly Video for Universal 2 Series Positive Displacement Pumps - WCB

Fluid Head Assembly Video for 2 Series Positive Displacement Pumps - WCB

Shimming Video for Universal 2 Series Positive Displacement Pumps - WCB