�Թ�Ⱥ

Vented Loop

The vented loop is available in different sizes and with its inverted U-shape with a vent at the top it allows the air to escape. Vented loops are to prevent back siphoning and are found in toilet discharge lines or in systems which are mounted below the waterline.

Y-Valve

Designed for installation in waste discharge and bilge pump-out systems. Allows waste to be pumped directly into holding tank or diverted to another discharge.

Conversion Kit - AquaT Silent Electric

AquaT Silent Electric conversion kit/spare kit for Compact or Comfort sized bowls. For separate external flush system with flush pump or by existing centralized fresh water system using solenoid. Controls the rinse and discharge with two separate buttons on the control panel.

Includes discharge pump, base, connectors and two-switch control panel.

Conversion Kit - AquaT Standard Electric

Standard Electric conversion kit/spare kit for Compact or Comfort sized bowls. To convert a manual model to electric, or to replace an existing electrical system with a “one-push” flush and discharge system. Includes pump, base, hose, fittings and the one- push control panel. Fits with all AquaT Standard Electric models.

Repair Pump Kit - AquaT Toilet Manual

This manual toilet pump assembly pairs with any AquaT Manual Marine Toilet. It incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left handed or right handed use.

Control Panel - AquaT Silent Electric 12V/24V

Two-switch control panel to allow for separate rinse and discharge when using an external flush pump or solenoid.

Control Panel - AquaT Standard Electric 12V/24V

One-push button on the control panel for combined rinse and discharge pump.

Flush Pump 3.5

An efficient and robust flush pump to be used with on-off switch for any marine 12V/24V toilet with external flushing pump system. Fits with all Silent Electric models. Delivers 13 l/min/3.5 GPM.

Viking Power 32

Electrical 12V/24V diaphragm pump to manage all types of wastewater. Can pump un-macerated sewage to a holding tank or transfer it onwards to a septic tank. Equipped with double check valves to secure operation at all times. To be used also with vacuum toilet systems.

Viking Universal

Heavy duty manual bilge pump to fill and discharge waste water holding tanks. Compact to minimize required space, can be installed bulkhead or through. Equipped with large 38 mm connectors to manage all kinds of waste water.

Solenoid

Electric valve to be used with centralized fresh water system.